.
.
.
.
.
.
.
.
.
.
.
CLEVER Inspections
Our Guarantee to You
As professionals with an engineering background, we are your consultants in the home-buying process before, during AND AFTER the inspection. We know finding your dream home can be difficult to say the least. And once you finally find it- it means everything to you! We treat your inspection with that same level of importance.
Incredible Value – Unparalleled Protection – Quick and Reliable Service
WHAT IS A HOME INSPECTION?
CLEVER Guides You in the Home-Buying Process
| Most “home inspections” are actually multiple inspections wrapped into one package. After doing thousands of inspections we recommend most Clients get, at a minimum, these 5 core inspections as part of their home inspection order: |
| (Click Each for Service Description) | |
| 1. | General Home Inspection |
| 2. | Wind Mitigation Inspection |
| 3. | 4-Point Inspection |
| 4. | Thermal Imaging Inspection |
| 5. | Termite Inspection |
| + Add-On Services |
| > | Mold Inspection w/Air Sampling– The ONLY way to know if mold is in the air you’ll be breathing at your new place. Lab certified. |
| > | Pool Inspection |
| > | Sewer Scope- Recommended for all homes built before 1980 |
| > | Seawall Inspection- Recommended for any property with a seawall. |
| > | Lead testing- especially important for homes built before 1980 |
| > | Asbestos testing- especially important for homes built before 1980 |
What’s Inspected During a General Home Inspection?
The general inspection is what most people think of when they think of a Home Inspection. In reality, the general inspection is a good start but should be supplemented with other services (see below). During a General Home Inspection, we look at 400+ aspects of your new home including:
- Foundation and Support Structure
- Air Conditioning and Heating Systems
- Roof Systems
- Electrical
- Plumbing Systems and Fixtures
- All Major Appliances
- Garages and Carports
- Gutters and Downspouts
- Decks
- Walls and Ceilings
- Faucets
- Lighting
- A/C Wall Units
- Insulation
- Attic
- Water Heater
- Structural integrity
- Surface Drainage
- Windows & Doors
- Steps and Stairs
- And Much More
For a full description of what’s inspected during a home inspection and limitations, click here: InterNACHI SOPs
FOUR POINT AND WIND MITIGATION INSURANCE INSPECTIONS
 |
 |
IMPORTANT: Don’t Delay Your Closing! If you’re getting a mortgage- you need these before you can close on your new home. These must be completed by a licensed home inspector and you save the most by getting them with your home inspection. The four point (4Pt) inspection allows you to get a property insurance policy quote which you’ll need before you can close on your new home. It’s most often required for properties 30+ years in age but some insurance companies require it on newer properties as well so check with your insurance company prior to the home inspection to know for sure if you’ll need this or not. The wind mitigation (wind mit) inspection helps make insurance affordable by giving you up to 88% off your wind insurance premiums and should be ordered for every property. |
TERMITE/WDO INSPECTION
 |
Always get a termite inspection with a home inspection! On average, termites are found in 25%+ of homes in South Florida. In some areas it’s 50%+! They create costly issues for homeowners and most people don’t know they have termites until the damage has been done. |
THERMAL IMAGING INSPECTION
 |
These are the types of issues you’ll want to know about BEFORE you Buy Home inspections tell you about what an inspector can see with the naked eye at the home, but thermal imaging helps look for active leaks, electrical problems and energy loss issues in areas that can’t be seen with the naked eye (i.e. behind walls, above ceilings, etc). We’ll use our high-tech thermal imaging equipment to tell you what’s going on in unseen areas. |
MOLD INSPECTION W/AIR SAMPLING AND LAB ANALYSIS
 |
Mold can exist in a home, even if you can’t see it. Air sampling with laboratory analysis is the only way to know for sure if mold is in the air you’ll be breathing at your new home, and what types are present. Mold issues can be complex. That’s why in the State of Florida only licensed mold professionals like us are qualified to perform mold evaluations. We also look for conditions conducive to mold growth at the property and do a moisture analysis so you can prevent future issues from developing. |
Nobody Gives You More
.
Much More Than Typical Home Inspectors
MORE TRAINING – MORE EXPERIENCE – MORE SCHOOLING
Your new home has a story to tell and WE are best-suited to learn it. Our inspectors commonly find things other inspectors miss, so…
Don’t leave your inspection to chance- trust it to engineering and construction experience!
CLEVER Home Protection Plan- FREE With YOUR Inspection Bundle
Inspection Bundles Include $25,000+ in Warranties/Protections FREE!
